The purpose of the heavy duty Waler Beam is to be used for both horizontal and vertical shoring solutions. It may also be used as a diagonal brace for heavy-duty shoring systems. Its simplicity in design allows it to adapt to the most demanding challenges and environments.
When utilized shoring applications, the greater loading capacities throughout the system considerably reduce the number of components required, and consequently the assembly and dismantling times.
Ten different lengths, from 3.5in (90mm) to 212.6in (3600mm), allow beams of nearly any length to be assembled
A variety of applications can be realized for large-scale projects such as gantries, shoring, structures, and heavy-duty formwork tables.
Standard accessories and clamp make it fully compatible with other component, easy to assemble/dismantle and improve work efficiency.
Form tie and other components can be used anywhere, complete freedom to create the optimum design whatever the application.
Using accurate welding jigs, manufactured from high-yield steel, combining maximum durability and load capacity with reduced unit weight. Completed by hot dip galvanizing, eliminating corrosion and minimizes maintenance.
Mega Beam temporary sections, which are robust and easy to assemble, can be used in many temporary work applications such as:
A versatile modular system with a full range of accessories, Mega Beam can be assembled into props, heavy lifting towers, frames and trusses. Its 1000kn axial load capacity provides complete solutions for:
- Facade Retention
- Back-propping and support system
- Wall formwork panels
- Vertical, horizontal and raking propping shores
- Structural Propping
- Bridge propping and jacking support compatible
- Spanning beams
- Propping and needling systems
1. Waler Beam 225
|DWB2236||141.7 in||WB 3600MM||160.9 lb||73.0 KG|
|DWB2227||106.3 in||WB 2700MM||121.3 lb||55.0 KG|
|DWB2218||70.9 in||WB 1800MM||88.2 lb||40.0 KG|
|DWB2212||49.6 in||WB 1260MM||77.2 lb||35.0 KG|
|DWB2209||35.4 in||WB 900MM||48.7 lb||22.1 KG|
|DWB2207||28.3 in||WB 720MM||44.1 lb||20.0 KG|
|DWB2205||21.3 in||WB 540MM||35.3 lb||16.0 KG|
|DWB2203||14.2 in||WB 360MM||27.3 lb||12.4 KG|
|DWB2201||7.1 in||WB 180MM||24.3 lb||11.0 KG|
|DWB2200||3.5 in||WB 90MM||21.2 lb||9.6 KG|
2. 6 Way Connector
|DWB0001||WB 6 WAY CONNECTOR||55.1 lb||25 KG|
3. Waler Beam Jacks(LH&RH)
|DWB0002||WALER BEAM JACKS(LH&RH)||28.2 lb||12.8 KG|
4. Anchor Plate
|DWB0003||WB ANCHOR PLATE||16.3 lb||7.4 KG|
5. Pivot Cleat Set
|DWB0004||WB PIVOT CLEAT SET||19.4 lb||8.8 KG|
6. Connecting pin & clip
|DWB0005||WB Connecti pin & clip||0.53 lb||0.24 KG|
7. Tilt Plate
|DWB0006||WB TILT PLATE||13.3 lb||6.0 KG|
8. Bracing Connector
|DWB0007||WB BRACING CONNECTOR||4.6 lb||2.1 KG|
9. Turn - Buckles
|DWB0008||WB TURNBUCKLES 914-1160||18.5 lb||8.4 KG|